For sale is a 100-Ton automated Hydraulic Forming Press parts unit. Cavlon Item # 7044 Raw weight is 500 lbs Raw dimensions are 50*38*51"

FEATURES: Brand:  STENHOJModel: 501682Made in Denmark.Designed piston speed 32.5 inches per minutePower supply 208 volts 3-phase 4KWUpper platten about 9.75 inch diameter--6" cylinder rod.Lower platten about 20 by 24 inches.36 inch stroke--90 cm scale.  45"clearance between uprights.~66 inches maximum clear between upper and lower plattens.Pressure gauge reads in tons.  Guessing a 7 to 8000 psi hydraulic system. Measured 3500 at about half force.  Pump unit includes high volume pump as well as high pressure low volume pump and a unit that converts over once a certain pressure is reached so that motor does not overload.Solenoid valve and pressure transducer on power unit (600 Bar)Has manual operating valve. Has bottom travel limit switch (not connected).~8,000pounds raw weight, 61x35x156 inches  for the press.  ~400 pounds and 26 by 20 by 38" for the hydraulic supply. This is pick it up or back-haul freight item only--NO LTL.  The frame has to be layed on its side unless you bring a double drop trailer and get overheight permits. CONDITION: Looks very good functional used a bit weathered. No safeties or safe guards. No electronics control box. No anvil lifting system--use forklift. We have tested full  stroke and force rating. Ships without oil unless you come pick it up. Can demo.  Sold as-is, no return. CA inventory  # 5359

For sale is a  50 Ton HYDROLAIR 4-Post Platen Press With Air Over Hydraulic Pump Model # N9257. Cavlon Item # 3313. Raw weight is 2400 lbs. Raw dimensions are 44*34*74.

For sale is a  EMHART Traveling Head Stomp Clicker Press 64" Of Travel 230 V 3 Phase 3 KVA Model #GTH 2065. Cavlon Item # 3309. Raw weight is 4300 lbs. Raw dimensions are 26*96*92.