Name: Phone Number: Email: Your offer price: Quantity:

Thank you! Your offer has been submitted!

Thank you! Your offer has been submitted!

We’re sorry! There’s been a technical problem!

Please contact us directly!

Cavlon Online Store

220 Ton H-Frame Hydraulic Press
$29,995.00
FEATURES:

Brand:  STENHOJ
Model: 501682
Made in Denmark.
Designed piston speed 32.5 inches per minute
Power supply 208 volts 3-phase 4KW
Upper platten about 9.75 inch diameter--6" cylinder rod.
Lower platten about 20 by 24 inches.
36 inch stroke--90 cm scale.  45"clearance between uprights.
~66 inches maximum clear between upper and lower plattens.
Pressure gauge reads in tons.  Guessing a 7 to 8000 psi hydraulic system. Measured 3500 at about half force.  Pump unit includes high volume pump as well as high pressure low volume pump and a unit that converts over once a certain pressure is reached so that motor does not overload.
Solenoid valve and pressure transducer on power unit (600 Bar)
Has manual operating valve. Has bottom travel limit switch (not connected).
~8,000pounds raw weight, 61x35x156 inches  for the press.  ~400 pounds and 26 by 20 by 38" for the hydraulic supply. This is pick it up or back-haul freight item only--NO LTL.  The frame has to be layed on its side unless you bring a double drop trailer and get overheight permits.


CONDITION:

Looks very good functional used a bit weathered. No safeties or safe guards. No electronics control box. No anvil lifting system--use forklift. We have tested full  stroke and force rating. Ships without oil unless you come pick it up. Can demo.  Sold as-is, no return. 
CA inventory  # 5359

Sold Out
  • Cavlon Item No. 5359
  • Model: 501682
  • 0 Units in Stock

This product was added to our catalog on Friday 16 November, 2012.

Please contact us at (505) 227-7709 or email linda@cavlon.com

Copyright � 2024 Cavlon Associates. Powered by Zen Cart
FedEx service marks used by permission.